The rotary cultivator is commonly used in agricultural machinery, how should we use it?
1.Rotary tiller properly articulated
To do a gimbal rotation flexibility, flexibility, and cable wiring.
Second mount rotavator to do, to make both ends of the joints in the same plane, and to ensure that the job status shafts of the driving shaft and the driven shaft in the same straight line.
2 correct operation, rotary tiller
1) Rotary machine upgrade is not too high. Due to upgrade too high, universal joints twist bad, but also because of the suspension rod under tension chain and drive shafts collide and cause damage to components.
2)Engaging tractor unit power output shaft, rotary tiller can not lift too high. That tilt gimbal axes can not be too large, and must engage in the clutch completely separated.
3)To split hydraulic systems, rotary deep application cylinder valve positioning and positioning clamp control in farming should be placed in the dispenser handle floating position, not on the neutral position.
3.Correct steering tractor
1) Buried rotary tiller should take place rotary tiller walking tractor method, so as to avoid a sudden increase in resistance to damage the machine.
2) Must turn or rotary tiller blade before reversing all unearthed.
3)Transfer of the fields or through the ditch, crossing the ridge, should be referred to the highest position of the rotary tiller, and cut off the power shaft associated fuel, and the hanger with locking device equipment in a fixed position.
4)Parking is not Rotary, the Rotary machine should be decreased significantly, not a long suspension park.
4.Personal safety
1) Job encountered by rotary tiller when wrapped around the grass parking can not be forced to rotate their feet pedaling, or easy to twist your feet hurt. The correct way is: the power output shaft of the handle moved to a neutral position, and then remove the weeds with a long-handled tools.
2) When the Rotary machine work, machine and machine back to stand above prohibition in order to prevent accidents.
The above is the need to pay attention to the safety operation of the rotary cultivator, we hope to help.
