Jet-air whitening machine is used to grind brown rice and white rice, which can be used in the process of rice mill.
Working principle
Brown rice in the white room by the “spray”, sand roller and rice knife, the combination of the role of the screen rolling joint, brown rice skin is repeated “cutting” and “rub away”, which was crushed into the accuracy requirements white rice.
“Grinding white” is carried out in the “fluidized bed”, give full play to the grain between the “self-grinding”, “mutual grinding” friction fine grinding role, “rub rice” and “brush” role well, The finished product bright white, with bran less. But also by sucking rice bran, but also further the role of cold rice.
Structural characteristics and their role
1. the use of a new jet air technology, air volume, air flow resistance is small, the air spray effect is remarkable.
2. from the oblique hole with a convex sieve, rice knife and hexagonal sieve frame composed of sieve roller and roller with the low-speed rotation, roller is eccentric and high ribs of the sand blast roller, this unique Of the new rice chamber structure can strengthen the whitening, speed up the row of bran, lower rice temperature, improve the process results, enabling a shorter, smaller rice chamber to achieve greater yield and higher accuracy. Its “fluidized” Mianbao gentle uniformity, so the finished rice broken less, a high rate of rice, easy to wear parts of the wear uniform, long life. “rice” floating “loose”, so that the load to reduce, to “start with a material”, not “boring car.”
3. the overall screening tube pumping easy, according to the quality of brown rice and the quality of the pros and cons and the accuracy of finished products and the level of wear and tear of sand roller, swap screen cylinder change the “gas.” Therefore, rice machine adaptability, sand roller utilization.
4. rice mill short and cantilever in the rack, the assembly and disassembly operations are extremely convenient and light labor intensity.
5. closed air fine grinding chamber and the spring pressure of the axial door of a large area of rice mouth, so that the finished product uniformity, color, and precision adjustment convenience.
6. the lower part of the rice chamber suction separator, to complete the rice, brush rice, chaff, chilled rice and other operations, the merger process, simplifying the process.
7. in the processing of more than one standard high-precision meters, the use of multi-machine light grinding process.
